right angle worm gearbox

High-Quality Right Angle Equipment Drives are made for efficiency, quiet operation, and long service existence. SDP/SI provides a broad selection of Right Angle Gear Drives in a variety of configurations, materials, operating speeds, and multiple ratios. Standard catalog products include precision and commercial quality gear drives provided in both inch and metric sizes. For adjustments or custom designs contact and talk with a SDP/SI applications engineer.

Our offering includes, but isn’t limited to the following:
Miniature sized Right Position Gear Drives, 1 inch square, are perfect for compact designs that require low backlash and input boosts to 2000 rpm.

When weight can be an issue, get Right Angle Bevel Gear Drives that feature a lightweight casing of PTMT Polyester 30% glass filled, precision floor stainless steel shafts, sintered bronze bearings and molded nylon gears.

Right Angle Worm Gear Drives accommodate input boosts to 2000 rpm and so are available in gear ratios: 5:1, 10:1 and 20:1.

Right Position and Dual Helical Gear Drives can be found in two versions, light-duty, rated boosts to 600 rpm and durable, rated boosts to 1725 rpm.

An economy group of Correct Angle Bevel Gear Drives emerges in 1:1 and 2:1 ratios and rated speeds up to 500 rpm.

E Series Right Angle
The Ever-Power Electronic Series is a higher efficiency, right angle gear reducer designed for increased torque density, reduced inventory and improved efficiency. Through the use of modified helical-bevel technology, the Electronic Series can operate at 90% efficiency and can offer up to 60% higher torque than a typical worm gear reducer. Through various components and modular elements, the E Series recreates the vital dimensions of a typical worm right angle worm gearbox gearbox and provides the opportunity to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with rankings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill the requirements of our OEM customers. Our close partnerships with this installed customer base provided much insight to their evolving need for more high-precision right-position gearing options. To be able to fill that need, Ever-Power extended upon our correct angle item offering to include a variety of high-precision worm gearboxes, known as our EP Series.
These servo grade speed reducers are perfect for the most challenging of motion control applications. Each series incorporates a globoidal worm gear mesh design to be able to obtain the torque handling capability and the highest levels of precision that our SHIMPO customers attended to expect from us. The insight design of our EP right-angle gearbox applies the same idea of motor modularity that is common across our High Precision product family, meaning our clients and distribution companions get the same degree of flexibility, product variety, and overall availability that is unparalleled within our industry.
Advantages of the EP Series platform design;
Quiet operation, compared to other competitive worm gearing
Compact, with specific reduction ratios
High torsional rigidity and torque carrying capacity
A lower life expectancy backlash feature, unique among right-angle gearheads
Industry regular hollow bore output with other shafted options
Extremely lightweight, optimized construction
Free of maintenance, lubrication for lifetime
These right-angle servo grade gearboxes are ideal for applications within custom assembly and test systems, packaging equipment, metal cutting and metal forming machinery, general purpose automotive, among numerous others. If your application requires the small footprint of a right-angle worm gear without sacrificing on the overall performance, contact Ever-Power about the EP Series today.
Standard Right Angle Gearbox Features
All ratios equipped with right-hand worm gears
Load capacity unaffected by direction and rotation
Variety of mounting Options
Upon Request:
Left-Hand Gears
Stainless Steel Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Velocity Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Gear Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Position Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor efficiency is important. Get in touch with our technical sales staff for help identifying which gearbox alternative is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and allow for a corner change with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes were created with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The proper angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest operation of our rate reducers. These gearboxes are made to manage varying loads with small backlash. With frame sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to suit your needs. Our 52 frame size is also available with plastic gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest effectiveness and best output torque of most our speed reducers. These gearboxes are created to deal with varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their gear cluster design provides an effective method for dissipating temperature. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options so they work well in environments with limited space. Our parallel shaft gear reducers offer an affordable drop-in replacement solution for most small parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement when a equipment in the form of a screw, also known as a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are metal or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A major benefit of worm equipment reducers is that they produce an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox provides right hand threads; to change the direction of the result, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

Cast Iron Worm Equipment Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The systems possess a one piece #Fc20 all cast iron housing, NEMA motor quill style input flanges or shaft inputs, come pre-packed with synthetic oil and also have a 12 months warranty.

Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special dark paint
Product Specifications

OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART Amount HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Correct Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR A few minutes) 27
Result SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1

Ever-Power EP series triple-reduction worm gear rate reducers are available in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in pounds. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.

These reducers are ideal for water/waste-water tools drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where large torques/slower speeds are needed.

These reducers are also offered with a helical primary reduction stage and are termed the HDVM series

Enclosed Gears / Gearboxes
Enclosed gears, also known as gearboxes or swiftness reducers, are open gears within a housing. The housing supports bearings and shafts, retains in lubricants, and protects the elements from surrounding conditions. Gearboxes can be found in a wide range of load capacities and quickness ratios.

The objective of a gearbox is to improve or reduce speed. Because of this, torque output would be the inverse of the function. If the enclosed drive can be a swiftness reducer, the torque result will increase; if the drive boosts speed, the torque result will decrease. Gear drive selection elements include: shaft orientation, quickness ratio, design type, character of load, gear rating, environment, mounting position, working temperature range, and lubrication.

Basic Types of Gearboxes

Worm Gear Speed Reducers
A single reduction rate reducer can achieve up to a 100:1 decrease ratio in a little package. Known as right position drives, these contain a cylindrical worm with screw threads and a worm. With a single start worm, the worm equipment advances only 1 tooth for each 360-degree switch of the worm. So, regardless of the worm’s size, the gear ratio may be the ‘size of the worm gear to 1′. Higher decrease ratios can be created through the use of double and triple decrease ratios.

Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 pieces of gears. Power is certainly transmitted from a high-swiftness pinion to a slower-speed gear. Helical gears usually operate with their shafts parallel to each other. The two most common types are the concentric (input and output shafts are in range) and parallel shaft (insight and result shafts are offset). Single-stage helical gear reducers are typically used for equipment ratios up to about 8:1. Where lower speeds and higher ratios are necessary, double, triple, and quadruple equipment reduction stages can be used.

Tags:

As one of leading pto drive shaft
manufacturers, suppliers and exporters of mechanical products, We offer pto drive shaft
and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of pto drive shaft

Recent Posts