Cycloidal pinwheel reducer is normally a up-dated of fresh type transmissing machine designed with K-H-V less teeth engagement and the cycloidal pin wheel clenching system, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, conveyors, project machinery etc and Sector. various fields.
Features:
1. Equipment is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is followed for all with high precision, good contact overall performance and gears
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service lifestyle and high bearing capacity;
5. easy to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: many equip with various engine or other power source conveniently.Same machine type may equip with different power motor. It really is easy to know the combination and
junction between every equipment type.
2.Transmission ratio: good division, wide scope. The combined equipment type may form very large transmission ratio, i.e. outcome suprisingly low rotary speed.
3.Form of installation: the positioning to be installed isn’t limited.
4.High strength, small: the box body is made of substantial strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and good grinding process, which means bearing ability of unitvolume is huge.
5.Long life: Beneath the condition of accurate type chosen (including choosing ideal operation parameters)normal procedure and maintenance, the life span of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The using parts include lubricating essential oil seal, bearing and essential oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is certainly low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High acceleration ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-straight down ratio and the efficiency is certainly a lot more than 90%. If use multi-speed travel the speed-down ratio can be bigger.
2. Compact
Being adapted epicyclic transmitting theory, the input and outcome shaft are in same axis center, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can recognize high reduction ratio machine.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved simultaneously, and there are two gears engaged with 180 degree symmetry. Accordingly, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the position precision and rotation accuracy reach an extremely high level.
4. Less parts, convenient installation
The three basic elements achieve a higher deceleration ratio, plus they are all on a single axis, so the kit is simple to install and simple to shape.
5. Small in size and light in weight
Compared with the previous gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque capacity and reduction ratio, achieving small lightweight.
6 High torque capacity
Flexible wheel material USES specialized steel with excessive fatigue strength.Different from ordinary transmission system, the quantity of teeth meshing accounts for in regards to 30% of the full total quantity of teeth. Moreover, it is in call with the surface, in order that the pressure borne by each equipment is reduced and high torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high lowering ratio may be accomplished while maintaining high proficiency, and miniaturization of generating motor could be realized.
8. Low noise
The apparatus meshing cycle velocity is low, the transmission activity force balance, therefore the operation is quiet, and the vibration is very small.
◆Huge speed ratio and large efficiency single-stage transmission can achieve a deceleration ratio of just one 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will be larger.
◆Because planetary transmission principle is adopted, the type shaft and end result shaft are on the same axis line, to ensure that the machine style can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts produces the vibration and voice limited by a minimum.
◆Reliable use and very long service life since the main parts are constructed of huge carbon chromium steel, large strength is obtained by quenching (HRC58-62), and rolling friction can be used in some transmission contacts, so the service life is very long.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has various advantages, versatile, and can be both negative and positive operation.
•Big ratio, and excessive efficiency Smooth operation,
• low noise The usage of reliable,
• extended life can reach 50000 hours
• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),
• operation and contact with rolling friction, basically very little wear, durable.
• Compact structure,
• small size Because the application of a planetary transmitting, the type shaft and the end result shaft on the same axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy maintenance, and break down easily install,
• the least number of parts together with simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion improve the output strength, precision and carrier.
(2).Hoop clamp coupling have five connection techniques ideal for different application environments.
(3).Size above PL/PF120(including)precision and high power integral inner gear housing, processed in one station,which get rid of the cumulative mistake and assembling error of split type.Eliminate casting process;adopt hot of forging process, that will reduce the blank material defects.
(4).The meshing equipment adopt shaving method after carburizing and quenching,which simpler to make gear area smooth and high precision,reduce the temperature rising caused by gear surface area gluing and friction.
This series worm-gear reducer was designed after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its efficiency and mounting dime nsions conform the same types 
of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, radiate heat efficiently, low noise and compact structure.
Great sealing and adaptability.Its blend with T equipment reducer and MB/MBN variator can meet all varieties of speed requirement.